Single Core Automotive Cable Fixed Specification (1)

1. The influence of electromotive force In order to prevent the effect of electromotive force due to short circuit, Single Core Automotive Cable must use sufficient strength
(1) The support is firmly fixed so that it can withstand the electromotive force corresponding to the expected short-circuit current.
2. Special precautions for high-voltage AC Single Core Automotive Cable High-voltage AC lines try to use multi-core cables. When Single Core Automotive Cable must be used for circuits with larger working currents, the following precautions should be taken:
(1) The cable should be unarmored or armored with non-magnetic materials. In order to avoid the formation of circulating currents, the metal shield should be grounded at only one point.
(2) All wires in the same circuit should be placed in the same pipe, conduit or trunking, or all phase wires should be installed and fixed together with wire clamps, unless they are made of non-magnetic materials.

(3) When installing two, three or four Single Core Automotive Cables to form a single-phase circuit, a three-phase circuit or a three-phase and neutral circuit respectively, the cables should be in contact with each other as much as possible. In all cases, the distance between the outer sheaths of two adjacent cables should not be greater than the diameter of one cable.